|
Product Details:
|
| Voltage: | 208-230 VAC | Hertz: | 50 / 60 Hz |
|---|---|---|---|
| Breaker Amperage (Type D): | 15 A | Phase: | Single |
| Receptacle: | 6-15R (Domestic Only) | Maximum Condenser Capacity: | 6 L |
| High Light: | Laboratory Research Benchtop Freeze Dryer,6 L Benchtop Freeze Dryer,Laboratory Research Bench Top Freeze Dryer |
||
The SP VirTis AdVantage Pro Freeze Dryer with Intellitronics™ Controller brings freeze dryers up to date, with ethernet compatibility so that you can monitor cycles from any terminal capable of receiving emails. With its touchscreen display and intuitive design, the AdVantage Pro represents the cutting-edge in freeze-drying. It’s versatile design allows tray and flask refrigeration, so it can be used for a large variety of applications - whether that’s freeze-drying bulk products or stoppered vials. Engineered using premium stainless steel, the reliable build quality ensures downtime is reduced and productivity is maximized.
| Performance Specifications | ||
| XL | EL | |
| Shelf Temperature Control Range | -40 to 60 °C | -55 to 60 °C |
| Lowest Shelf Temperature (50 Hz / 60 Hz) | -57 °C / -60 °C | -62 °C / -65 °C |
| Shelf Pull-Down from 20 °C to -40 °C | ≤ 40 minutes | ≤ 30 minutes |
| Temperature Uniformity | ± 1.0 °C | ± 1.0 °C |
| Lowest Condenser Temperature (50 Hz / 60 Hz) | -67 °C / -70 °C | -82 °C / -85 °C |
| Maximum Condenser Capacity | 6 L | 6 L |
| Maximum Ice Condensing Capacity in 24 hours | 4 L | 4 L |
| Maximum Deposition Rate | 0.17 L/hour | 0.17 L/hour |
| Vacuum Rate of Rise | ≤ 60 mT/hour (≤ 0.08 mbar/hour) |
≤ 60 mT/hour (≤ 0.08 mbar/hour) |
| Number of Compressors | 1 | 2 |
| Compressor Horsepower | 3/4 | 1/3, 3/4 |
| Note: Performance specifications are based on SP Scientific test data from units operating at an ambient room temperature of approximately 20 °C. SP Scientific recommends an operating range of 15-25 °C (59- 77 °F) |
||
| Electrical Requirements | ||
| XL | EL | |
| Voltage | 208-230 VAC | 208-230 VAC |
| Hertz | 50 / 60 Hz | 50 / 60 Hz |
| Breaker Amperage (Type D) | 15 A | 15 A |
| Phase | Single | Single |
| Receptacle | 6-15R (Domestic Only) | 6-15R (Domestic Only) |
| Utility Requirements | ||
| XL | EL | |
| Compressed Air (Stoppering Option Only) | 60 - 90 psig (4.1 - 6.2 bar) | 60 - 90 psig (4.1 - 6.2 bar) |
| Approx. Peak Heat Generated (With Vacuum Pump) | 5,000 BTU/h (1.5 kW) | 7,000 BTU/h (2 kW) |
| Approx. Peak Heat Generated (Without Vacuum Pump) | 4,000 BTU/h (1.2 kW) | 6,000 BTU/h (1.8 kW) |
Contact Person: Lisa Niu
Tel: 86-15699785629
Fax: +86-010-5653-8958
