|
Product Details:
|
| Model: | UVOZ-3300C | Light Source Life: | Approx. 30,000 - 50,000 Hours |
|---|---|---|---|
| Optional Ranges: | 0-200g/Nm3, 0-100g/Nm3, 0-50g/Nm3, 0-1000ppm | Content Interface: | Ozone Concentration, Temperature, Pressure |
| Dimensions: | 230mm (H) X 330mm (W) X 150mm (D) | Temperature: | -20 To 50°C |
| High Light: | pharmaceutical chemical uv ozone analyzer,4.3" uv ozone analyzer |
||
UVOZ-3300C Ozone Gas Analyzer
The UVOZ-3300C ozone gas analyser calculates the current ozone concentration by measuring the change in light signal intensity before and after ozone absorption of UV light. The equipment uses an advanced dual-light UV light source system with an intelligent lamp management system, which enables the UV lamp to reach the measurement state quickly after switching on. It is mainly used for continuous detection of ozone gas in various industrial environments, and can also be used to detect ozone gas in operating pipelines, vessels and other environments. It is widely used in pharmaceutical, chemical, municipal and wastewater treatment industries for the measurement of ozone generator outlet concentration and ozone generator output.
| Model | UVOZ-3300C |
| Measuring range | 0-300g/Nm3 |
| Optional ranges | 0-200g/Nm3, 0-100g/Nm3, 0-50g/Nm3, 0-1000ppm |
| Light source life | approx. 30,000 - 50,000 hours |
| Sampling method | positive pressure sampling, negative pressure sampling (optional) |
| Display interface | 4.3" touch screen operator interface |
| Content interface | ozone concentration, temperature, pressure |
| Auxiliary functions | Temperature compensation, pressure compensation |
| Display units | g/Nm3, mg/NL, %WT optional |
| Display resolution | 0.01g/Nm3 |
| Gas flow | 0.5L ± 0.2L/min |
| Input pressure | <0.1 MPa |
| Concentration error | 0.5% FS max |
| Linearity error | 0.5% FS max |
| Zero point drift | <±0.3%.FS |
| Response time | 0.03 s for signal, 0.3 s for display |
| Ambient temperature | -20 to 50°C |
| Piping connection | Quick screw (stainless steel) |
| Tandem sample aperture | Φ8 (8mm*6mm) (optional) |
| Bypass sampling aperture | Φ6 (6mm*4mm) |
| Communication method | RS-485 |
| Output mode | 4-20mA (active) |
| Relay signal | relay signal for high alarm point, relay signal for low alarm point |
| Power supply | AC 110-220V |
| Dimensions | 230mm (H) x 330mm (W) x 150mm (D) |
| Note | 1mg/L = 1g/m3 = 467PPM. |
| Free warranty | 24 months (mainframe sensor) |
Contact Person: Lisa Niu
Tel: 86-15699785629
Fax: +86-010-5653-8958
