|
Product Details:
|
| Model: | UVOZ-3300C | Light Source Life: | Approx. 30,000 - 50,000 Hours |
|---|---|---|---|
| Optional Ranges: | 0-200g/Nm3, 0-100g/Nm3, 0-50g/Nm3, 0-1000ppm | Content Interface: | Ozone Concentration, Temperature, Pressure |
| Dimensions: | 230mm (H) X 330mm (W) X 150mm (D) | Temperature: | -20 To 50°C |
| High Light: | touch screen oxygen concentration analyzer,pipelines oxygen concentration analyzer,real time display oxygen concentration analyzer |
||
UVOZ-3300C Ozone Gas Analyzer
The UVOZ-3300C ozone gas analyser has a touch screen operator interface with real time display of ozone gas concentration, with pressure and temperature compensation and display, and can be set for automatic zero time and manual zeroing mode. High concentration (g/Nm3) range with flow input and real time display of ozone generator output. The equipment uses an advanced dual-light UV light source system with an intelligent lamp management system, which enables the UV lamp to reach the measurement state quickly after switching on. It is mainly used for continuous detection of ozone gas in various industrial environments, and can also be used to detect ozone gas in operating pipelines, vessels and other environments.
| Model | UVOZ-3300C |
| Measuring range | 0-300g/Nm3 |
| Optional ranges | 0-200g/Nm3, 0-100g/Nm3, 0-50g/Nm3, 0-1000ppm |
| Light source life | approx. 30,000 - 50,000 hours |
| Sampling method | positive pressure sampling, negative pressure sampling (optional) |
| Display interface | 4.3" touch screen operator interface |
| Content interface | ozone concentration, temperature, pressure |
| Auxiliary functions | Temperature compensation, pressure compensation |
| Display units | g/Nm3, mg/NL, %WT optional |
| Display resolution | 0.01g/Nm3 |
| Gas flow | 0.5L ± 0.2L/min |
| Input pressure | <0.1 MPa |
| Concentration error | 0.5% FS max |
| Linearity error | 0.5% FS max |
| Zero point drift | <±0.3%.FS |
| Response time | 0.03 s for signal, 0.3 s for display |
| Ambient temperature | -20 to 50°C |
| Piping connection | Quick screw (stainless steel) |
| Tandem sample aperture | Φ8 (8mm*6mm) (optional) |
| Bypass sampling aperture | Φ6 (6mm*4mm) |
| Communication method | RS-485 |
| Output mode | 4-20mA (active) |
| Relay signal | relay signal for high alarm point, relay signal for low alarm point |
| Power supply | AC 110-220V |
| Dimensions | 230mm (H) x 330mm (W) x 150mm (D) |
| Note | 1mg/L = 1g/m3 = 467PPM. |
| Free warranty | 24 months (mainframe sensor) |
Contact Person: Lisa Niu
Tel: 86-15699785629
Fax: +86-010-5653-8958
