|
Product Details:
|
| Power: | Electronic | Function: | Automotive Gas Analyser |
|---|---|---|---|
| Size: | 240*135*70mm | Weight: | 2kg |
| Highlight: | Handheld Flue Gas Analyzer,TUV Portable Gas Analyzer,1000ppm Portable Gas Analyzer |
||
Independently tested by TÜV SUD to EN50379 the new KANE9206 Quintox is a cost effective & versatile emissions monitoring solution. Customised to your specific requirement the KANE9206 Quintox uses electro-chemical sensors to monitor Carbon Monoxide, Nitrogen Dioxide, Nitric Oxide, Sulphur Dioxide, Hydrogen Sulphide, and Oxygen.
Combine up to five electro-chemical sensors with our infra-red measurement technology to monitor Carbon Monoxide (up to 10%), Carbon Dioxide & Hydrocarbons.
|
1. The KANE9206 Quintox Standard Kit
|
||||||
|
KANE9206 Standard Kit Includes: Handset, Base Unit & Power Supply
|
||||||
|
Measures
|
02 |
CO (H2 Compensated)
|
CO2 (calculated) |
Temperature |
Pressure
|
Efficieny |
|
0-25%
|
0-10000ppm
|
0-20%
|
0-1100°C
|
0-150 mbar
|
1-100%
|
|
|
2. Select additional sensor options
|
||||||
|
Optional Sensor Upgrades
|
The Quintox can be fitted with any combination of up to five additional electro-chemical sensors plus one complete infra-red module
|
|||||
|
Electro-Chemical Sensors
|
NO (Hi Range)
0-5000ppm KNO1H/Q
|
NO (Lo Range)
0-100ppm
KNO1L/Q
|
NO2
0-1000ppm KNO2/Q
|
SO2 (Hi Range)
0-5000ppm KSO2H/Q
|
SO2 (Lo Range)
0-100ppm KSO2L/Q
|
H2S
0-1000ppm KH2S/Q
|
|
Infra-Red Module
KHC/Q |
CO 0-10%
|
HC 0-5000ppm
|
CO2 0-20%
|
Please note: if Infra-Red Module KHC/Q is fitted, the Hi/Lo CO Protection Solenoid & Pump KHPURQ is also required.
|
||
|
3.Select a probe
|
|||||||
|
Optional Probes
|
Depending on your requirement a selection of high quality stainless steel probes with integral thermocouples are available
Hi-Temp = 1100°C/2140°F Standard Temp = 600°C/1112°F |
||||||
|
|
Hi Temp Probe 1 metre removable shaft KMCHLP6
|
Hi Temp Probe 285mm removable shaft KMCHP6
|
Hi Temp Smoke Probe
1 metre removable shaft KMCHSLP6
|
Hi Temp Smoke Probe 285mm removable shaft KMCHSP6
|
Smoke Probe 285mm removable shaft KMCSP6
|
Professional Probe
1 metre removable shaft KMCLP6 |
Professional Probe 285mm removable shaft KMCP6
|
|
4.Optional upgrades
|
||
|
Used in conjunction with the heated probe & heated line, the sample conditioning unit comprises: a peltier fan cooled chiller assembly, a peristaltic pump to automatically remove condensate, the control electronics & power supply module
|
||
|
Sample Conditioning Unit
KMDM110/230 |
Heated Probe
KMHP1200 |
Heated Line
KMHL3000 |
|
Hi/Lo CO Protection Solenoid & Pump KHPURQ
Must be used with Infra-Red Module KHC/Q |
Hi/Lo purge protection allows a standard ppm sensor to be fitted providing accurate readings at below 20ppm.
When approaching over-range the solenoid operates & switches the gas flow to the electro-chemical sensor from flue gas to fresh air. The pump is then used to flush out the CO sensor & protect it from over-range.
CO readings continue to be taken using the CO channel of the Infra-Red Module KHC/Q |
|
|
Pumped Water Trap
WTS9206P |
The pumped water trap empties itself on a regular basis & so protects the analyser from condensate overflow, this allows long term unattended monitoring
|
|
|
Heater - Toxic Sensors
KHSA |
Enables toxic sensors to operate effectively at below 0°C ambient temperature. The heater maintains temperature at +5°C
|
|
Combining innovation & ease of use the AUTO600 Portable Diesel Smokemeter is designed to meet official test standards.
Ideal for:Car & Light Commercial Workshops, PSV Workshops, Fleet Operators, Pre-Compliance Testing, Servicing vehicles, Local Authority and Environmental Testing.
Contact Person: Lisa Niu
Tel: 86-15699785629
Fax: +86-010-5653-8958
