|Name:||HiYi Portable 5 Gas Analyzer High Sensitivity Built-in Pump CO H2S O2 EX CO2 Multi Gas Detector||Gas:||EX/LEL/CH4/O2/CO/H2S/CO2（optional)|
|Data Storage:||100, 000 Entries||Display:||2.5-inch TFT LCD Display|
|Response Time:||<20s||Output Signal:||Wireless Transmission And Print Function(Optional)|
|Working Environment:||-40 ℃ ～ 70 ℃, <95% RH (no Dew)||Battery:||3.6V Li-on Battery, 5500 MAh|
|Charging Time:||8 Hours||Protection Level:||IP66|
|Alarm Mode:||Audible-visual Alarm,Vibration Alarm,Voice≥75dB@25cm||Size:||18*7.8*3.3 Cm|
IP66 Multi Gas Detector,
0.35Kg Multi Gas Detector,
IP66 5 Gas Detector
HiYi Portable 5 Gas Analyzer High Sensitivity Built-In Pump CO H2S O2 EX CO2 Multi Gas Detector
HiYi MS500 Portable Gas Detector
5 in 1 | Internal Pump | Large Data Storage
Clearance measurement was never this easy and convenient!
MS500 series is suitable for detecting the concentrations of gases in the atmosphere environment in the pipeline or confined space. The types for detection are more than 500 types.
It is suitable for detecting the concentrations of gases in the atmosphere environment in the pipeline or confined space; and the purity of the gas leakage and various high concentration single gases with the background gas as nitrogen gas or oxygen gas.
|Gases to be detected||
Arbitrary combination of 1 ~ 5 types of gases such as toxic gases, oxygen gas, carbon dioxide, inflammable and explosive gases, TVOC, and so on.
Optional configuration: temperature and humidity measurements.
|Application scenarios||All the cases which requires the portable rapid detection of gas concentrations such as petroleum, chemical, pharmaceutical, environmental protection, combustion gas distribution, warehousing, smoke gas analysis, air governance, and so on.|
|Detection range||0 ~ 1, 10, 100, 1000, 5000, 50000, 100000ppm, 200 mg/L, 100%LEL, 20%, 50%, 100%Vol, can be selected; and other ranges can be customized.|
0.01ppm or 0.001ppm (0 ~ 10 ppm);
0.01ppm (0 ~ 100 ppm),
0.1ppm (0 ~ 1000 ppm),
1ppm (0 ~ 10000 ppm or more),
0.01 mg/l (0 ~ 200 mg/l),
|Detection principle||Electrochemical, catalytic combustion, infrared, thermal conductivity, PID photoionization, and so on, depending on the type of gas, range, field environment and user demand.|
|Sensor service life||Electrochemical principle: 2 ~ 3 years; Oxygen gas: 2 years or 6 years can be selected; infrared principle: 5 ~ 10 years; catalytic combustion: 3 years; thermal conductivity: 5 years; PID photoionization: 2 ~ 3 years.|
|Allowable error||≤±2% F.S (other or higher precision levels can be customized)|
|Response time||T90≤20 seconds||Recovery time||≤30 seconds|
|Working environment||Temperature: -40 ℃ ~ + 70 ℃, humidity: ≤10 ~ 95% RH, and built-in filters can be used in high humidity or high dust environment.|
|Sample gas temperature||-40 ℃ ~ + 70 ℃, and the optional configuration of high-temperature sampling and cooling filter handle will be possible to detect the smoke gas at the temperature of 800 ℃ or higher.|
|Temperature and humidity measurement||Optional configuration: temperature at -40 ℃ ~ + 70 ℃, accuracy level at 0.5 ℃; humidity at 0 ~ 100% RH, precision level at 3 % RH|
|Power supply||3.6VDC, 5500mA high capacity rechargeable polymer battery|
|Display mode||2.5-inch high-definition color screen|
|Detection mode||Built-in pump-suction type measurement, and flow rate at 500 ml / min. Calibration flow rate should be greater than 500 ml / min, three-way pipe should be connected, so as to ensure that the excessive gas will be discharged from the bypass|
|Alarm mode||It is possible to set as sound & light alarm, vibration alarm, sound & light + vibration alarm, Turning off the alarm.|
|Communication interface||USB (charging and communication), optional: RS232, infrared communication, automatic recognition|
|Data storage||Standard configuration is the data storage capacity for 100, 000 entries|
|Explosion-proof type||Intrinsically safe type|
|Explosion-proof mark||Exia II CT6|
|Exterior dimensions||180×78×33mm (L×W×H)|
|Standard accessories||Manual, qualification certificate, warranty card, USB charger (including the data cable), high-grade aluminum instrument case, belt clip, humidity dust filter|
|Optional items||Temperature and humidity measurement function, 1.2 m retractable sampling handle (1-10 meter hose, and the standard length is 1 meter), 0.4 meter stainless steel sampling handle (with dust filter, not retractable), high temperature sampling and cooling filter handle, high temperature humidity pretreatment system, multiple humidity dust filter, hanging rope, CD-ROM (upper level computer communication software), external mini wireless infrared printer|
All the cases which requires the portable rapid detection of gas concentrations such as petroleum, chemical, pharmaceutical, environmental protection, combustion gas distribution, warehousing, smoke gas analysis, air governance, and so on.
Contact Person: Lisa Niu
Detection gas: Complex gas (carbon monoxide CO, hydrogen sulfide H2S, oxygen O2, flammable gas EX) or any other single gas
Detection range: CO (0 ~ 1000ppm), H2S (0 ~ 100ppm), O2 (0 ~ 30%VOL), Ex (0 ~ 100%LEL),Other range can be customized
Explosion-proof mark: Exia II CT4 Ga
Detection accuracy: ≤±3% (F.S)